If you’re in Tasmania and looking for a 6 x 6 shed price, this guide breaks down every cost — not just for the shed itself, but every step of the install, including council approvals, concrete slab, and the build, so you can save yourself time, money and avoid the 5 costly mistakes we most often see shed owners make.

Cost 1: Council Approval

Many 6 x 6 sheds in Tasmania qualify as Low Risk Work — but only if your site meets certain requirements based on:

• Setbacks from boundaries and easements
  
• Distance from the main residence and other outbuildings
  
• Site overlays like bushfire, being flood-prone, or heritage zones
  

If your project qualifies for Low Risk Work, you can expect to pay around:

$70 – $200 in council fees

You can check the official criteria via Consumer, Building and Occupational Services (CBOS), or let us handle it for you here. 

​​Disclaimer: These costs are based on averages from Tasmanian councils. We always recommend confirming with your local council’s planning department to ensure your shed qualifies as Low Risk Work — and to check the current fees, as they are subject to change.

Cost 2: Concrete Slab Costs

Concrete slabs are often one of the biggest costs when building a shed of this size. While pricing may seem straightforward, it’s important to note that these estimates are based on a flat site with no more than 100mm of fall across the slab area.

In Tasmania, truly flat and easily accessible sites are relatively uncommon. Many properties require additional site preparation such as levelling, excavation, or dealing with restricted access, all of which can increase the final cost significantly.

A 6 x 6m shed requires a 36m² concrete slab. As a general guide, most concreters will charge between $130 – $200 per m².

For a 6 x 6m slab (36m²), this comes to Total: $4,680 – $7,200 (approximate cost)

Since this kind of work typically falls under Low Risk Work, there may not be a requirement to use a licensed builder, which can help keep costs down — depending on your site conditions.

 

Cost 3: Installation Costs

Even a simple shed can become complex to install depending on your site and the shed you’ve chosen, including:

• Inclusions in the shed kit (e.g. windows, personal access doors)
• Shed height — taller sheds cost more to install (Find out more about shed height here
• Roof pitch — when roof slopes go above 22 degrees, installation becomes more complex and expensive
• Site access and proximity to major towns or cities — remote sites often mean higher travel costs or accommodation for installers
• Whether you’re planning to DIY

The cost to install a 6 x 6 shed is usually between $2,000 – $4,000

Installers generally price based on accessibility, height, and complexity, so a basic, flat, open site near a city will be on the lower end of the range.

And finally, Cost 4: The Shed Kit Costs

A typical 6 x 6m shed price for a kit with 3m high walls that is designed for Tasmanian conditions can vary depending on:

• The structural steel frame
• Type of roof and wall sheeting
• Flashings, fasteners, and brackets
• Engineering documentation
• Whether it has 1 or 2 roller doors

Expect final costs to be between $7,000 – $10,000 (including delivery)

Disclaimer: These are approximate costs. Final pricing depends on what’s included in the kit (e.g. insulation, extra doors or additional windows) and your site location.

Choosing the right supplier ensures your shed will be designed for Tasmanian conditions — including location-based wind ratings and snow loadings in colder areas. Cheaper online kits may not factor in local environmental conditions, leading to issues down the track.

We’ve seen examples of:

• Roller doors being blown in due to incorrect wind classifications
• Sheds that didn’t allow for solar panels at the design phase
• Kits supplied without proper windlock or snow-load provisions
  

Getting this right at the design stage can avoid major unexpected costs later.

Summary and Price Guide

This guide is designed to give you a realistic overview of a 6 x 6 shed price in Tasmania, assuming it falls under the Low Risk Work category and uses reputable local suppliers and trades.

Keep in mind:

• Every site is different, there’s no one-size-fits-all answer
• Total cost depends heavily on your location, access, site conditions, and kit inclusions
• Hiring a company to manage the whole process (approvals, quotes, trades) will add to the overall cost
• Guru tip: Always allow at least 20% extra on top of your budget for unexpected expenses — the building industry is rarely 100% predictable

Approximate Total Breakdown of a 6 x 6 Shed Price

Cost Component	Best Case Scenario	Higher End Scenario
Shed Kit	$7,000	$10,000
Council Fees	$70	$200
Concrete Slab	$4,680	$7,200
Installation	$2,000	$4,000
Total (approx.)	$13,750	$21,400

 

Want to save time, money and hassles and get the most accurate 6 x 6 Shed Price for Your Site?

With over 15 years experience building sheds in Tasmania, we’re here to simplify your shed build process for you. We connect you with local Tasmanian suppliers, concreters, and installers who are experienced, reputable, and familiar with council requirements. You’ll receive:

• Multiple quotes from trusted companies — so you can compare options
• Recommendations based on your site and budget
• Help navigating council approvals and Low Risk Work eligibility
• Local suppliers that design for Tasmanian conditions (wind, snow, terrain)

The beauty of this service is you’ll save time, reduce costly mistakes, and get a shed that suits your property — without the stress of figuring it all out yourself.